Product ID:SILICONE CAULK TYPE IV
MSDS Date:01/01/1987
FSC:8030
NIIN:00-180-6339
MSDS Number: BHMGP

Emergency Phone: 502-769-3385

Info Phone: 502-769-3385

Cage: 58149

Telephone: 502-769-3385

Cage: 58149

ACETOXYSILANE

Fraction By Weight: 5%

ACGIH TLV: 10 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYES: MAY IRRITATE WITH SLIGHT PAIN,
REDNESS AND POSSIBLE MINOR CORNEAL INJURY. SKIN: SEVERAL
REPEATED/PROLONGED EXPOSURES MAY CAUSE SLIGHT IRRITATION. INHALE:
NOSE & THROAT INJURY MAY OCCUR. FREQUENT LY PROLONGED EXPOSURE MAY
CAUSE SLIGHTINJURY.
Effects of Overexposure:EYES: MAY IRRITATE WITH SLIGHT PAIN, REDNESS
AND POSSIBLE MINOR CORNEAL INJURY. SKIN: SEVERAL REPEATED/PROLONGED
EXPOSURES MAY CAUSE SLIGHT IRRITATION. INHALE: NOSE AND THROAT
INJURY MAY OCCUR. FREQUE NTLY PROLONGED EXPOSURES MAY CAUSESLIGHT
INJURY.

First Aid:EYES: FLUSH WITH WATER & OBTAIN IMMEDIATE MEDICAL ATTENTION.
SKIN: WIPE OFF & FLUSH WITH WATER. INHALATION: REMOVE TO FRESH
AIR & OBTAIN IMMEDIATE MEDICAL ATTENTION. ORAL: OBTAIN IMMEDIATE
MEDICA L ATTENTION.

Flash Point Method:TOC
Flash Point:>212 F/ 100 C
Extinguishing Media:WATER, WATER FOG, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.

Handling and Storage Precautions:STORE BELOW 90 F. USE REASONABLE CARE
AND CAUTION.
Other Precautions:PROVIDE ADEQUATE VENTILATION DURING USE TO KEEP
AMBIENT AIR ACETIC ACID VAPOR CONCENTRATION BELOW TLV OR USE
RESPIRATORY PROTECTION.

Respiratory Protection:ACID GAS/ORGANIC VAPOR TYPE
Ventilation:LOCAL EXHAUST MAY BE NEEDED, MECHANICAL (GENERAL)
RECOMMEND-ED
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:SKIN: WASHING AT MEALTIME AND END OF SHIFT IS
ADEQUATE.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:> 300 F
Vapor Pres:< 5 MM
Spec Gravity:1.04
Evaporation Rate & Reference:< 1 (ETHER=1)
Solubility in Water:<0.1
Appearance and Odor:ACETIC ACID-LIKE PASTE
Percent Volatiles by Volume:< 5

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION. WATER, MOISTURE OR HUMID AIR.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
ACETIC ACID VAPORSARE FORMED
Hazardous Decomposition Products:SILICONE DIOXIDE, CARBON DIOXIDE, AND
TRACES OF INCOMPLETELYBURNED CARBON PRODUCTS

Waste Disposal Methods:ALL LOCAL, STATE & FEDERAL REGULATIONS
CONCERNING HEALTH & POLLUTION SHOULD BE REVIEWED TO
DETERMINEAPPROVED DISPOSAL PROCEDURE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.